You can stop your hunt for a guide to unpair Logitech mouse or for a post to explain Logitech Unifying receiver unpair. Because you’ve arrived at the right place! If your mouse is close to the receiver, and the connection is lost, the mouse will attempt to reconnect with the last receiver it was paired with. To disconnect a mouse from a wireless receiver, synchronize the mouse with another computer that has a different wireless receiver. So, if you need to remove your mouse from the wireless receiver for any reason, this article will explain how to unpair your mouse in a few simple steps. It also covers syncing a Logitech wireless mouse with a different receiver and using Unifying- and Non-Unifying receivers.
A wireless Logitech mouse that is Logitech Unifying Receiver compatible can connect to any Unifying Receiver. To pair or unpair a supported wireless mouse, you’ll need Logitech’s Unifying software. Mics are not compatible with the Unifying Receiver and should only be in use with the receiver that comes with them or via Bluetooth. This article describes how to sync a Logitech wireless mouse with a different receiver and how to use Unifying- and Non-Unifying Receivers. Also, know how to disconnect a wireless controller from a receiver. If you have a Logitech wireless mouse, or different compatible accessories, and want to sync them with your new receiver, there is a way. Simply continue on to learn the steps for syncing a Logitech mouse with the receiver.
Table of Contents
Did you know? If you’ve misplaced your Logitech wireless mouse’s Unifying USB receiver, you can get a substitute for about $15 on the Logitech website. Put another way, you can get a replacement for around $10 on Amazon.
You should keep in mind that you can also unpair devices with the Logitech Unifying software. This is how you do it:
Wireless Logitech mouse and keyboards connected to a Unifying Receiver are incompatible with other receivers, including Logitech’s own. Bluetooth supports various wireless devices that are compatible with the Unifying Receiver.
With any Unifying Receiver, you can use any wireless Logitech mouse that supports the Unifying Receiver. Up to six wireless Logitech devices, including mouse and keyboards, can easily connect to a single Unifying Receiver.
The Logitech Unifying Receiver is a USB device that connects most wireless Logitech mouse. Your mouse will come with a receiver, but if you lose it, you can sync it to another receiver.
Wanna reset your Logitech Wireless Mouse Click Here to find out the easiest steps
Get Instructions to reset Logitech Bluetooth Mouse here-
By turning your mouse over, you can see if the power switch on the bottom of the unit is turned on. Ensure the mouse receiver is connected to your computer’s USB port. By pushing the oval-shaped reset button at the bottom, you can reset your mouse.
Also Read: Guide to use Logitech Gaming Software without a Logitech Gaming Mouse
If your Logitech wireless mouse receiver isn’t working, you may need to upgrade your Unifying Receiver first. Then delete and reinstall the software, and then sync your mouse with the receiver. Check to see if your PC has the correct USB drivers installed. Look for the files USB.inf and USB.PNF. Remove any applications that are interfering with your receiver, such as gaming controller software. If all else fails, you can easily and affordably replace your wireless receiver.
NOTE: The unifying receiver does not support all the wireless Logitech mouse. Logitech’s gaming mice, for example, do not support the Unifying Receiver and instead rely on the company’s “Lightspeed” wireless technology. The square, sun-like icon printed on wireless Logitech mice that are compatible with Unifying can be identified.
Logitech mouse is not showing up in Bluetooth-
If your Logitech wireless mouse is compatible with the Bluetooth features, you can use it instead of a receiver to connect it. All you have to do is simply go to Settings > Devices > Add Bluetooth on a Windows 10 PC to do this. Push the Connect button on your mouse; the device should display on the screen as an accessible Bluetooth device. Use your mouse to choose it and finish the pairing procedure.
To fix a Logitech wireless mouse that won’t operate, remove the unified receiver and batteries for roughly five seconds. If you’re not sure why this might work, keep reading. The device will be able to restart and the computer will detect it again if it is removed and reinstalled.
Resync Logitech Mouse with a USB receiver-
Once you Unpair the Logitech mouse, you can also explore a way to resync the Logitech mouse with a USB receiver. By pushing the Easy-Switch button, you can choose a channel. It is necessary to press the Connect button. To pair the Unifying receiver, plug it into a USB port and follow the onscreen instructions. When the mouse is paired, the mouse’s selected channel number light blinks for five seconds before remaining constant.
So, that was all in our post to help you unpair the Logitech mouse and we hope you liked it!
Published On : March 16, 2022 by: Sakshi/Category(s) : Technology
Leave a Reply